Back
Buy the LEKI Legacy Lite AS / Cressida Cork Lite / Makalu Lite Compact Replacement Middle Section online at Leki

LEKI Legacy Lite AS / Cressida Cork Lite / Makalu Lite Compact Replacement Middle Section

Product code LESECM98 - Black Anodized

£21.75
Size Guide
Item added to bag. View bag
Please select a size from above to proceed.
You can select only one domestic product per size.
Delivery Info

Description

LESECM9814 mm Middle Section427 mm LengthBlack AnodizedSpeed Lock Plus (SL+)14 mm SectionProduction Era: Approximately 2008–2018
The Legacy Lite AS and related LEKI trekking poles use the Speed Lock Plus (SL+) locking system. This 14 mm middle section at 427 mm length is the correct replacement for the models listed below. The middle section connects the upper section assembly to the lower section and is the most frequently replaced component after extended field use. Before ordering, confirm the printed length on your existing middle section reads 427 mm and that the section diameter is 14 mm. The locking system must be Speed Lock Plus (SL+). If you are unsure of compatibility, email photos of the full pole and existing section to [email protected] before ordering.

 

► Full Technical Specifications
LEKI Spare Part Code LESECM98
Article Code 81 06 14 14 0427 33
Section Position Middle — connects upper to lower section
Section Diameter 14 mm
Printed Length 427 mm (check this on your existing section before ordering)
Section Profile 14 mm constant-diameter tube
Material Aluminium
Finish / Colour Code Black Anodized (33)
Locking System Speed Lock Plus (SL+)
Construction 3-section telescopic (Vario)
Production Era Approximately 2008–2018. Verify printed length and diameter on your existing section before ordering.
Sold As Single section
► Compatible Poles & Fitting Guide
This section is confirmed compatible with the following LEKI pole models. Verify your article code before ordering.
✓ Legacy Lite AS — confirmed compatible
✓ Cressida Cork Lite — confirmed compatible
✓ Makalu Lite Compact — confirmed compatible
✓ Makalu Lite AS Compact — confirmed compatible
✓ Khumbu Lite Compact — confirmed compatible
✓ Makalu Cork Lite — confirmed compatible
✓ Legacy Lite Compact — confirmed compatible
✓ Legacy Lite — confirmed compatible
✓ Additional confirmed article codes (model names not fully established): 65023261, 65023262, 65122321, 65122212, 65222201, 65222211, 65222361, 65223801, 65223802, 65323861, 65423261, 65423262, 65423263, 656215393C — if your pole carries one of these codes, email photos to [email protected] for confirmation before ordering.
✓ To fit: release the SL+ lever on the upper section by pressing the unlock button and opening the lever; slide the worn middle section downward and out; insert the new section fully into the upper collar, then close and tension the lever until firm.
✓ Tension check: after fitting, extend the pole to working height and apply firm downward pressure — the section should hold without slipping. Re-tension the lever clamp if needed.
✓ Article code check: the article code is usually printed on the section tube itself. Cross-reference with the codes listed above before ordering. If your code is not listed, email [email protected] with photos for confirmation.
✓ Post-fit care: keep the Speed Lock mechanism clean and free from grit. Dry the section fully before storage; do not store the pole collapsed with moisture inside the tube.
✓ Spare parts support: LEKI typically supports spare parts for approximately 10 years from product launch. Contact [email protected] or call +44 (0)1250 710414 to confirm availability.
✓ LEKI UK service: for warranty queries, complex repairs, or any section you cannot identify with certainty, contact LEKI UK: [email protected] | +44 (0)1250 710414.
► Not Compatible With
✗ Classic Lever Clamp (CLA) or External Lever System (ELS) poles — older lever-based sections are not interchangeable with SL+ sections
✗ SLS (Super Lock System) poles — internal twist-lock system; Speed Lock sections are not compatible
✗ Folding (FX) poles — entirely different construction, these sections do not apply
✗ Poles with a different section specification — this section is 14 mm diameter and 427 mm
 

 

BEFORE YOU ORDER — FOUR-POINT CHECK
✓ Printed length: the printed length on your existing middle section must read 427 mm
✓ Diameter: section diameter must be 14 mm (check the markings on the existing section)
✓ Locking system: confirm your poles use Speed Lock Plus (SL+)
✓ Construction: confirm 3-section telescopic (Vario); not suitable for folding (FX) or 2-section poles

Trade Mark of Manufacturer: LEKI

Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany

Contact: www.leki.com

You may also like

SIGN UP FOR NEWS OF OUR LATEST PRODUCTS & OFFERS

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Customer Care

Follow Us