LEKI Ultratrail FX.One Middle Replacement Section 2 — Trail Running Poles
Product code LE797265225852 - Standard
£26.00
Description
14 mm Carbon Middle Section 2 (MS2) Push-Button Folding Fixed Length 4-Section Pole
The LEKI Ultratrail FX.One Middle Replacement Section 2 is the genuine OEM spare for the MS2 position of the Ultratrail FX.One — LEKI's trusted fixed-length folding trail running pole used by runners across the UK fells, the Alps, and ultras worldwide. The 14 mm carbon shaft delivers the same stiffness and minimal weight profile as the original section. The Ultratrail FX.One uses a Push-Button assembly system: press the button at the base of each section to release the internal locking mechanism, fold the pole flat to 36 cm for carry, then reverse to lock into a rigid trail running tool. Four sections — 16 | 14 | 14 | 14 mm — connected by internal bungee cord for fast, reliable deployment mid-race or on the move. When the MS2 section is cracked or bent, this genuine replacement restores full pole integrity without replacing the entire unit. Exact-fit carbon tube, correct 14 mm diameter, right section position — nothing generic, nothing approximate.
Black endcap? Do not order — not user-fittable on black endcap poles. Contact [email protected] or call +44 (0)1250 710414 before proceeding.
► Full Technical Specifications
| Section Position | Middle Section 2 (MS2) |
| Tube Diameter | 14 mm |
| Tube Material | Carbon |
| Compatible Pole | LEKI Ultratrail FX.One |
| Full Pole Section Structure | 16 | 14 | 14 | 14 mm (4 sections) |
| Assembly System | Push-Button (fixed-length FX.One) |
| Pole Length Type | Fixed Length (105–135 cm, 5 cm increments) |
| Pack Size | 36 cm |
| Full Pole Weight | 182 g per pole |
| Pole Code | 65225852 |
► Compatibility & Fitting Guide
This section fits:
✓ LEKI Ultratrail FX.One (all lengths, 105–135 cm)
✓ Poles using Push-Button assembly with a 4-section 16|14|14|14 mm carbon structure
✓ MS2 = third section from bottom (second section counting from the grip down)
✓ LEKI pole code 65225852 — printed on the shaft near the Shark grip
How to identify your section:
Disassemble the pole fully. Lay out all four sections. The MS2 is the second section from the top (below the 16 mm grip section). Damaged sections typically show cracks, kinks, or broken button housings.
► Not Compatible With
✗ Ultratrail FX.One Superlite (12 mm sections — different diameter entirely)
✗ Any Speed Lock, Speed Lock Plus, or Speed Lock 2 Plus adjustable vario poles
✗ Cross Trail FX Superlite Compact (CLD folding, 12 mm carbon)
✗ Makalu FX.One Carbon (trekking, 16|14|14|14 mm — different pole family)
✗ Lower section or MS1 of the same pole (different position, different fit)
BEFORE YOU ORDER — QUICK CHECK
✓ Confirm pole code 65225852 on the shaft — this identifies the Ultratrail FX.One (not the Superlite)
✓ Your pole must use Push-Button assembly (press button on each section to fold) — not a Speed Lock lever
✓ This is the MS2 position (second section from the grip, third from the tip) — verify which section is damaged
✓ This section is 14 mm diameter — the Superlite version uses 12 mm and is not interchangeable
✓ Workshop route: If your pole has a black endcap, or if you are unsure at any step, do not attempt to fit. Email [email protected] with photos of your full pole, handle, and damaged section, or call +44 (0)1250 710414.
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com