LEKI Khumbu Pro FX.One TA — Replacement Lower Section (with Tip)
Product code LE797065420711 - Standard
£39.00
Description
This is the replacement lower section — with Flex Tip included — for the LEKI Khumbu Pro FX.One TA folding trekking pole (LE65420711). The lower section is the bottom part of the pole, from the FX split point down to the carbide tip, and can be replaced at home using basic tools.
Three size variants are available, each covering specific lengths from the Khumbu Pro FX.One TA fixed-length range. Select the variant that matches the length of your pole: the 110+115 cm variant fits both 110 cm and 115 cm poles; the 120+125 cm variant fits both 120 cm and 125 cm poles; and the 130 cm variant fits the 130 cm pole only.
This section is also compatible with LE654207191 per LEKI catalogue data. It is not compatible with other Khumbu variants or the Makalu FX.One range. If you are unsure which section fits your pole, contact LEKI UK with photos of the full pole and the damaged section before ordering.
Why it matters on the mountain
- LEKI's FX technology is designed for this — the lower section is end-consumer replaceable, meaning a damaged pole does not have to become a discarded pole
- Replacing a single section costs a fraction of a new pole, and takes minutes at home with a basic wrench
- The Flex Tip is included — no separate tip replacement required, the section arrives ready to install
- LEKI supports spare parts availability for approximately 10 years from product launch, making long-term repairability a practical reality for this model
KEY FEATURES
- Replacement lower section (UT) for LEKI Khumbu Pro FX.One TA (LE65420711)
- Aluminium construction — HTS 6.5, matching the parent pole material
- Includes Flex Tip with carbide insert — no separate tip purchase required
- Three size variants covering the full 110–130 cm pole range
- FX-compatible — installs at the grey end cap split point on the pole
- End-consumer replaceable — DIY installation with a basic wrench
- Black endcap? Do not order — not user-fittable on black endcap poles. Contact [email protected] or call +44 (0)1250 710414 before proceeding.
HIGHLIGHTS
Which size do I need? ▼
The correct size depends on the total length of your Khumbu Pro FX.One TA pole. Check the length printed on the section (or refer to your original purchase): poles of 110 cm or 115 cm require the 110+115 cm variant; poles of 120 cm or 125 cm require the 120+125 cm variant; and the 130 cm pole requires the 130 cm variant. Two pole lengths share a lower section design within the -110 and -120 variants. If you are unsure, email photos of your pole to [email protected] before ordering.
FX Technology — How Section Replacement Works ▼
LEKI's FX (Foldable and Exchangeable) system allows the lower section to be replaced by the end consumer without sending the pole to a service centre. The grey end cap on the pole marks the FX split point — this is where the lower section separates from the rest of the pole. A basic wrench is all that is needed to release and replace the section. The new section clicks into place and locks at the same point. Full replacement takes around five minutes. LEKI provides service videos as a guide through the process.
Flex Tip — Already Installed ▼
The Flex Tip is pre-installed on this section. The Flex Tip features a carbide insert that can flex up to 30° without deforming — it absorbs off-angle strike loads during hiking and returns to shape, extending tip life on varied terrain. A trekking basket can be fitted to the Flex Tip for use on soft or snowy ground. No separate tip purchase is required when ordering this section.
HTS 6.5 Aluminium — What TA Means ▼
TA stands for Tempered Aluminium. HTS 6.5 is LEKI's highest-grade aluminium alloy — the same material used in the Khumbu and Makalu telescopic pro ranges. It provides maximum structural rigidity and durability in an aluminium section, with a better strength-to-weight ratio than standard aluminium grades. For a replacement lower section, this means the spare part matches the structural performance of the original pole exactly.
ALL PROPERTIES
Full Specifications ▼
Section Type
Lower section (UT) — with Flex Tip
Material
Aluminium (HTS 6.5)
Tip
Flex Tip (carbide insert) — pre-installed
Size Variants
110+115 cm / 120+125 cm / 130 cm
Fits
Khumbu Pro FX.One TA (LE65420711), all lengths; also LE654207191
System
FX — end-consumer replaceable
Sold As
Individual section (single piece)
Country of Origin
Czech Republic
COMPATIBILITY
Compatible poles: LEKI Khumbu Pro FX.One TA (LE65420711), Standard length range, 110–130 cm, all colour variants; also LE654207191 per LEKI catalogue data
Size selection: Match the section variant to your pole length — 110+115 cm section for 110 or 115 cm poles; 120+125 cm section for 120 or 125 cm poles; 130 cm section for 130 cm poles
Baskets: Standard LEKI trekking baskets fit the Flex Tip included with this section
If your pole has a black endcap, or if you are unsure at any step, do not attempt to fit. Email [email protected] with photos of your full pole, handle, and damaged section, or call +44 (0)1250 710414.
NOT COMPATIBLE WITH
- Khumbu FX TA (LE65522841) — different construction; section geometry is not shared with this model
- Khumbu telescopic range (Khumbu, Khumbu Lite, Khumbu AS, Khumbu Lite AS) — telescopic poles use a different section architecture and are not FX-compatible
- Makalu FX.One Carbon (LE65420701) — carbon construction with a different section system; the lower section for that model is LE797065420701
- This is the lower section only — the middle section (LE797265420711) is a separate spare part
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com
