LEKI Ultratrail FX.One Superlite Pink Middle Replacement Section 1 — Trail Running Poles
Product code LE797165225842 - Standard
£26.00
Description
12 mm Carbon Middle Section 1 (MS1) Push-Button Folding Fixed Length 137 g Pole
The LEKI Ultratrail FX.One Superlite Middle Replacement Section 1 is the genuine OEM spare for the MS1 position of the Ultratrail FX.One Superlite — LEKI's race-bred, competition-proven trail running pole that delivers maximum performance at minimal weight. Weighing just 137 g at 120 cm, the Ultratrail FX.One Superlite is built for athletes who demand precise pole handling on technical terrain across the UK fells, the Alps, and the world's most demanding ultras. The MS1 is the uppermost replaceable section — a precision 12 mm carbon tube that connects directly to the base of the 14 mm top section via the internal bungee cord. The Push-Button folding system collapses the four sections to a 35 cm pack in a single motion, ready to stow in a race vest in seconds. This exact-fit spare replaces only the damaged section, maintaining the weight and integrity of a genuinely raced-in setup without the cost of a full replacement. Correct 12 mm diameter, correct MS1 position, same factory quality.
► Full Technical Specifications
| Section Position | Middle Section 1 (MS1) — 3rd from bottom |
| Tube Diameter | 12 mm |
| Tube Material | Carbon |
| Compatible Pole | LEKI Ultratrail FX.One Superlite |
| Full Pole Section Structure | 14 | 12 | 12 | 12 mm (4 sections) |
| Assembly System | Push-Button (fixed-length FX.One) |
| Pole Length Type | Fixed Length (105–130 cm, 5 cm increments) |
| Pack Size | 35 cm |
| Full Pole Weight | 137 g (at 120 cm) |
| Pole Code | 65225842 |
► Compatibility & Fitting Guide
This section fits:
✓ LEKI Ultratrail FX.One Superlite (all lengths, 105–130 cm, all colour variants)
✓ Poles with Push-Button assembly, 4-section 14|12|12|12 mm carbon structure
✓ MS1 = 3rd section from the bottom — directly beneath the 14 mm top/grip section
✓ LEKI pole code 65225842 — printed on the shaft near the Trail Shark grip
How to identify your section:
Disassemble the pole fully. The MS1 is the top 12 mm section, directly attached to the base of the 14 mm top section via the internal bungee. This is the section closest to the Trail Shark grip when the pole is assembled.
Black endcap? Do not order — not user-fittable on black endcap poles. Contact [email protected] or call +44 (0)1250 710414 before proceeding
► Not Compatible With
✗ Ultratrail FX.One 14 mm (code 65225852 — larger 14 mm sections throughout, not superlite)
✗ Neotrail FX.One Superlite (65225861) or Neotrail Pro FX.One Superlite (65425891) — different pole models
✗ Any Speed Lock, Speed Lock Plus, or Speed Lock 2 Plus adjustable poles
✗ Cross Trail FX Superlite Compact (CLD folding, different assembly mechanism)
✗ MS2 or Lower sections of the same pole (different positions — not interchangeable)
BEFORE YOU ORDER — QUICK CHECK
✓ Confirm pole code 65225842 on the shaft — colour variants all share this code if they're the Ultratrail FX.One Superlite
✓ Your pole must use Push-Button assembly (press each section button to fold) — no Speed Lock levers
✓ This is the MS1 position (3rd from bottom, top 12 mm section directly below the grip) — confirm which section is damaged
✓ This section is 12 mm diameter — do not order the 14 mm Ultratrail FX.One or any trekking pole spare sections
✓ Workshop route: If your pole has a black endcap, or if you are unsure at any step, do not attempt to fit. Email [email protected] with photos of your full pole, handle, and damaged section, or call +44 (0)1250 710414.
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com
