LEKI Middle Section 3 for Khumbu FX TA
Product code LE797365222841 - Standard
£17.00
Description
The LEKI Middle Section 3 for the Khumbu FX TA is the genuine replacement for the third segment of the Khumbu FX TA folding trekking pole. It is a 14mm aluminium Vario section — the CLD internal lock allows height adjustment across the 110–130cm assembled pole range, restoring full adjustability after section damage or wear.
The FX system uses a multi-segment folding construction secured by an internal cord and CLD push-button locks at each fold joint. Replacing a single damaged segment restores full pole function without replacing the cord assembly, grip, or other sections. This Middle Section 3 fits the Khumbu FX TA (model 65222841) only.
A matching Lower Section (LE797065222841, 110–130cm Vario) is available separately for the tip-end segment of the same pole.
Why it matters on the mountain
- A cracked or bent FX segment renders the folding mechanism unusable — replacing the section restores the pole to full function at a fraction of new pole cost.
- Vario adjustment through the CLD lock lets you dial in precise height for ascent, descent, and flat terrain — critical for reducing wrist and shoulder strain across a full day's walking.
- Genuine LEKI aluminium section maintains the correct 14mm wall thickness and lock geometry — aftermarket sections can cause CLD mis-seating and lock slippage under load.
- HTS 6.5 aluminium construction provides reliable durability for all-day trekking without the additional handling care required by carbon sections.
KEY FEATURES
- Genuine LEKI Middle Section 3 for the Khumbu FX TA folding trekking pole
- 14mm aluminium (HTS 6.5) FX Vario section — adjusts across 110–130cm assembled pole height
- CLD (Core Locking Device) internal push-button adjustment — enables height setting without external levers or clamps
- FX folding system — section replaces without disassembling other sections or the grip
HIGHLIGHTS
FX Vario — folding with adjustable height ▼
The Khumbu FX TA uses LEKI's FX folding system — the pole folds into multiple segments for storage and packing, then deploys and locks straight via an internal tension cord. The Vario designation means the CLD (Core Locking Device) in this section allows height adjustment without a separate lever or clamp. This Middle Section 3 carries that CLD mechanism and sets the assembled pole height across the 110–130cm range.
Replacing an FX section — what's involved ▼
FX section replacement requires feeding the internal tension cord through the new segment and re-knotting at the tip end. LEKI recommends this is carried out by an authorised dealer or repair centre to ensure correct cord tension — incorrect tension affects the fold-to-open locking action. The cord is not supplied with this section; if the cord is also damaged, replace it at the same time using a LEKI FX spare parts repair kit.
Why aluminium for this section ▼
The Khumbu FX TA uses HTS 6.5 aluminium — a high-tensile alloy that balances weight, durability, and impact resistance for sustained mountain use. Aluminium sections withstand knocks and drops better than carbon equivalents and are the correct like-for-like replacement for this pole. Substituting carbon in a pole designed for aluminium alters stiffness characteristics and is not recommended.
ALL PROPERTIES
Full Specifications ▼
Section Position
Middle Segment 3 (MS3) — FX third from bottom
Section Diameter
14mm (single diameter — FX tube)
Shaft Material
Aluminium (HTS 6.5)
Construction
FX Folding — Variable Length (Vario)
Locking System
CLD — Core Locking Device
Assembled Pole Range
110–130cm
Fits
LEKI Khumbu FX TA (65222841)
Part Type
Genuine LEKI spare section
COMPATIBILITY
Compatible pole: LEKI Khumbu FX TA (model 65222841)
Spare section code: LE797365222841
Also available: Lower Section for Khumbu FX TA — LE797065222841 (110–130cm Vario)
NOT COMPATIBLE WITH
- Legacy FX TA (65222451) — uses its own MS3 section (797365222451), not interchangeable
- Jannu FX TA (65222861) — uses its own MS3 section (797365222861), not interchangeable
- Any LEKI telescopic (Vario) trekking pole — different section geometry and locking system
- LEKI FX carbon folding poles — carbon sections are not interchangeable with aluminium sections
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com
