14 mm Section
Carbon HRC
Lower Section
Push-Button Folding
110–135 cm Fixed
This genuine LEKI Lower Section spare fits the Ultratrail FX.One — LEKI's Racing Series trail running pole built for trail and ultra runners who want fixed-length stiffness with fast pack-down. The 14 mm Carbon (HRC) section is supplied at 310 mm to match the pole sizes listed below — fit the correct length and the pole performs exactly as it left the factory. These are fixed-length poles, so this section is length-specific — check your pole's printed length before ordering. From UK ultras to fast valley loops, the right spare gets your poles back under you for a fraction of the cost of a new pair.
BEFORE YOU ORDER — QUICK CHECK
✓ Your pole is the Ultratrail FX.One (LE65625851 / LE65625852)
✓ The damaged section is the Lower Section — see the section guide below
✓ This part fits: Ultratrail FX.One — 130 cm poles
✓ Measure the damaged section: 14 mm diameter × 310 mm length — other lengths are separate parts
✓ Black endcap? Poles with a black endcap are not user-fittable — do not order a replacement section for them
▸ Full Technical Specifications
| Section type |
Lower Section |
| Section diameter |
14 mm |
| Section length |
310 mm |
| Material |
Carbon (HRC) |
| Fitted with |
Trail Running Tip (yellow) |
| Folding system |
Push-Button (PB) |
| Full pole diameter stack |
16 | 14 | 14 | 14 mm |
| Pole construction |
Fixed length — non-adjustable |
| Tip / Basket |
Tip included (Trail Running Tip (yellow)); basket not included |
| LEKI product code |
820026141004310 (EAN 4028173398379) |
▸ Compatibility & Fitting Guide
Compatible with
✓ Ultratrail FX.One — 130 cm and 135 cm poles
Which section is the Lower?
The lower section is the tip end of the pole — it carries the tip and takes the most ground contact, which is why it is usually the first section to wear or take damage.
How the folding system works
The Push-Button (PB) system locks each folding section in place when the pole is assembled. These are fixed-length poles — there is no Vario height adjustment, so each section is supplied at the length that matches its pole size.
How to fit
1. Unfold the pole and locate the joint between the lower section and the section above it.
2. Release the folding lock at that joint and separate the sections.
3. Thread the internal cord through the replacement lower section, reconnect, and lock the joint back into position.
If the internal cord is damaged, the pole needs a workshop repair — a section swap alone will not fix it.
Black endcap? Do not order — black endcap poles are not user-fittable.
▸ Not Compatible With
✗ Other lower lengths for this pole (260 / 285 mm) — these fit different pole sizes
✗ The MS1 and MS2 sections of this pole — separate, non-interchangeable parts
✗ Ultratrail FX.One SL / Neotrail Pro FX.One SL (13 | 11.3 mm shaft) — these use the 11.3 mm SL section series
✗ Any telescopic (Vario non-folding) pole — different section architecture, not FX-compatible
