LEKI Carbon Titanium Antishock Replacement Lower Section
Product code LESECL67 - Carbon
£51.95
Description
LEKI Code: LESECL67 12 mm Lower Section 454 mm Length Carbon Black SL2 + SAS (Anti-Shock) 14/12 mm Section Production Era: Approximately 2004–2012
This 12 mm lower section is the correct factory replacement for the LEKI Carbon Titanium Antishock trekking pole, built on the reduced-diameter 14/12 mm Lite geometry with carbon construction. The SL2+SAS configuration combines the Speed Lock 2 (SL2) external lever for height adjustment with an integrated anti-shock spring in the lower section assembly. The carbon construction delivers a significant weight saving over aluminium Lite sections. The carbon black matt finish (colour code 098) and 454 mm printed length are the defining specifications for this section. From technical descents in the Cairngorms to long ridge traverses in Snowdonia, the Carbon Titanium Antishock offered carbon-fibre performance combined with SL2 anti-shock cushioning. When the lower section is damaged or the anti-shock mechanism fails, only this specific carbon SL2+SAS Lite section restores the original function. The 454 mm printed length and 12 mm diameter are specific to this configuration — verify both on your existing section before ordering. Sold as a single section.
► Full Technical Specifications
| LEKI Spare Part Code | LESECL67 |
| Article Code | 81 05 12 12 0454 98 |
| Section Position | Lower — tip end |
| Section Diameter | 12 mm |
| Printed Length | 454 mm — check this on your existing section before ordering |
| Section Profile | 14/12 mm |
| Material | Carbon |
| Finish / Colour Code | Carbon Black (098) |
| Locking System | Speed Lock 2 + SAS — external lever with integrated anti-shock; open lever to release, close to lock; anti-shock spring in section assembly |
| Construction | Telescopic (Vario) — 3-section |
| Production Era | Approximately 2004–2012. The 12 mm diameter and 454 mm printed length are specific to this configuration — verify both on your existing section before ordering. |
| Sold As | Single section |
► Compatible Poles & Fitting Guide
This lower section is confirmed compatible with the following LEKI poles. Always verify the printed length and diameter on your existing lower section before ordering.
✓ Carbon Titanium Antishock — article codes 6322161, 6322964, 6322401
✓ Diameter check: This is a 12 mm section. Measure the diameter of your existing lower section with calipers before ordering. A section measuring a different diameter requires a different spare part.
✓ Length verification: The 454 mm printed length is the defining specification — measure the printed marking on your existing lower section, not the physical length. A section showing any other printed length requires a different spare part.
✓ Fitting: Open the Speed Lock 2 lever to release the existing section, then slide it out from the tip end. Insert the new SAS section and close the lever firmly to secure. The anti-shock spring function is integrated into this section.
✓ Lock engagement: If the lever does not close fully or the section moves under load, tighten the adjuster nut clockwise in quarter-turn increments. Test the anti-shock spring function by applying downward pressure after fitting.
✓ Not sure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] so the correct replacement can be confirmed before ordering.
► Not Compatible With
✗ SL2+SAS poles with a lower section of a different diameter — the lever collar will not seat correctly on a different diameter section
✗ SL2+SAS poles with a lower section of a different printed length — SL2+SAS sections of other printed lengths are different spare parts and are not interchangeable
✗ SL2-only poles (no anti-shock) — this section includes the anti-shock mechanism and is specified for poles with integrated anti-shock only
✗ SL1 or SLS poles — different locking systems; this section is not compatible with Speed Lock 1 or Super Lock System poles
BEFORE YOU ORDER — FOUR-POINT CHECK
✓ Printed length: Must read 454 mm on your existing lower section — check the printed marking, not a physical measurement
✓ Diameter: Confirm 12 mm lower section diameter — measure with calipers. This is a 14/12 mm profile section
✓ Locking system: Confirm Speed Lock 2 + SAS — the lever opens outward and the section includes an integrated anti-shock spring. If your pole has SL1 levers or an SLS twist-lock, this section is not suitable
✓ Construction: 3-section telescopic (Vario) with 14/12 mm section profile — verify the profile matches before ordering
✓ Unsure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] for confirmation before ordering
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com
