LEKI Skytera FX Carbon SL MS2 — Trekking Poles

Product code 820226121020350 - Standard

£20.00
Size Guide
Item added to bag. View bag
Please select a size from above to proceed.
You can select only one domestic product per size.

Description

12 mm Section
Carbon HRC
Middle Section 2 (MS2)
CLD Folding
110–130 cm Vario
This genuine LEKI Middle Section 2 (MS2) spare fits the Skytera FX Carbon SL — LEKI's Performance Series trekking pole built for lightweight hikers who want the smallest possible pack size with Vario adjustment. The 12 mm Carbon (HRC) section is supplied at 350 mm to match the pole sizes listed below — fit the correct length and the pole performs exactly as it left the factory. The Skytera FX Carbon SL adjusts its overall length through the Speed Lock system on the upper shaft, but each folding section is a fixed factory length — so the replacement must match this section's dimensions exactly. Whether you are on the Lakeland fells, Snowdonia or a Highland multi-day, a fresh section beats replacing the whole pole.
BEFORE YOU ORDER — QUICK CHECK
✓ Your pole is the Skytera FX Carbon SL (LE65520661) — 110–130 cm Vario
✓ The damaged section is the Middle Section 2 (MS2) — see the section guide below
✓ This part fits: Skytera FX Carbon SL (110–130 cm Vario) — not the Compact, and not the Skytera FX.One SL
✓ Measure the damaged section: 12 mm diameter × 350 mm length — other lengths are separate parts
✓ Black endcap? Poles with a black endcap are not user-fittable — do not order a replacement section for them

 

▸ Full Technical Specifications
Section type Middle Section 2 (MS2)
Section diameter 12 mm
Section length 350 mm
Material Carbon (HRC)
Fitted with Stabilisation Ring
Folding system CLD folding + Speed Lock plus Vario adjustment
Full pole diameter stack 14 | 12 | 12 | 12 mm
Pole construction Vario — length adjustable via Speed Lock
Tip / Basket Not included — replacement shaft section only
LEKI product code 820226121020350 (EAN 4028173397990)
▸ Compatibility & Fitting Guide
Compatible with
✓ Skytera FX Carbon SL (110–130 cm Vario) — not the Compact, and not the Skytera FX.One SL
Which section is the MS2?
These poles fold into four sections. From the tip upward: the Lower section (tip end), MS2, then MS1, with the upper section and grip at the top. MS2 sits directly above the lower section.
How the folding system works
The pole folds via LEKI's Core Locking Device (CLD) — an internal lock in the folding joints — while overall length adjusts separately through the Speed Lock lever on the upper section.
How to fit
1. Unfold the pole and locate the joints either side of the MS2 section.
2. Release the folding lock and separate the damaged section from its neighbours.
3. Thread the internal cord through the replacement section, reconnect, and lock the joints back into position.
If the internal cord is damaged, the pole needs a workshop repair — a section swap alone will not fix it.
Black endcap? Do not order — black endcap poles are not user-fittable.
▸ Not Compatible With
✗ The MS1 and Lower sections of this pole — separate, non-interchangeable parts
✗ Skytera FX Carbon SL Compact (100–120 cm) — uses shorter sections
✗ Skytera FX.One SL — fixed-length Push-Button pole with its own 12 mm section series
✗ Any telescopic (Vario non-folding) pole — different section architecture, not FX-compatible

 

Trade Mark of Manufacturer: LEKI

Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany

Contact: www.leki.com