Back
Buy the LEKI Ultratrail FX.One MS1 (275 mm) — Trail Running Poles online at Leki

LEKI Ultratrail FX.One MS1 (275 mm) — Trail Running Poles

Product code 820126141200275 - Standard

£20.00
Size Guide
Item added to bag. View bag
Please select a size from above to proceed.
You can select only one domestic product per size.
Delivery Info

Description

14 mm Section
Carbon HRC
Middle Section 1 (MS1)
Push-Button Folding
110–135 cm Fixed
This genuine LEKI Middle Section 1 (MS1) spare fits the Ultratrail FX.One — LEKI's Racing Series trail running pole built for trail and ultra runners who want fixed-length stiffness with fast pack-down. The 14 mm Carbon (HRC) section is supplied at 275 mm to match the pole sizes listed below — fit the correct length and the pole performs exactly as it left the factory. These are fixed-length poles, so this section is length-specific — check your pole's printed length before ordering. From UK ultras to fast valley loops, the right spare gets your poles back under you for a fraction of the cost of a new pair.
BEFORE YOU ORDER — QUICK CHECK
✓ Your pole is the Ultratrail FX.One (LE65625851 / LE65625852) 
✓ The damaged section is the Middle Section 1 (MS1) — see the section guide below
✓ This part fits: Ultratrail FX.One — 135 cm pole
✓ Measure the damaged section: 14 mm diameter × 275 mm length — other lengths are separate parts
✓ Black endcap? Poles with a black endcap are not user-fittable — do not order a replacement section for them

 

 

▸ Full Technical Specifications
Section type Middle Section 1 (MS1)
Section diameter 14 mm
Section length 275 mm
Material Carbon (HRC)
Folding system Push-Button (PB)
Full pole diameter stack 16 | 14 | 14 | 14 mm
Pole construction Fixed length — non-adjustable
Tip / Basket Not included — replacement shaft section only
LEKI product code 820126141200275 (EAN 4028173401161)
▸ Compatibility & Fitting Guide
Compatible with
✓ Ultratrail FX.One — 135 cm pole
Which section is the MS1?
These poles fold into four sections. From the tip upward: the Lower section (tip end), MS2, then MS1, with the upper section and grip at the top. MS1 is the highest middle section, sitting directly below the upper section.
How the folding system works
The Push-Button (PB) system locks each folding section in place when the pole is assembled. These are fixed-length poles — there is no Vario height adjustment, so each section is supplied at the length that matches its pole size.
How to fit
1. Unfold the pole and locate the joints either side of the MS1 section.
2. Release the folding lock and separate the damaged section from its neighbours.
3. Thread the internal cord through the replacement section, reconnect, and lock the joints back into position.
If the internal cord is damaged, the pole needs a workshop repair — a section swap alone will not fix it.
Black endcap? Do not order — black endcap poles are not user-fittable.
▸ Not Compatible With
✗ Other MS1 lengths for this pole (225 / 250 mm) — these fit different pole sizes
✗ The MS2 and Lower sections of this pole — separate, non-interchangeable parts
✗ Ultratrail FX.One SL / Neotrail Pro FX.One SL (13 | 11.3 mm shaft) — these use the 11.3 mm SL section series
✗ Any telescopic (Vario non-folding) pole — different section architecture, not FX-compatible

 

 

Trade Mark of Manufacturer: LEKI

Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany

Contact: www.leki.com

You may also like

SIGN UP FOR NEWS OF OUR LATEST PRODUCTS & OFFERS

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Customer Care

Follow Us