Back
Buy the LEKI Ultratrail & Neotrail Pro FX.One SL MS1 (225 mm) — Trail Running Poles online at Leki

LEKI Ultratrail & Neotrail Pro FX.One SL MS1 (225 mm) — Trail Running Poles

Product code 820126111330225 - Standard

£20.00
Size Guide
Item added to bag. View bag
Please select a size from above to proceed.
You can select only one domestic product per size.
Delivery Info

Description

11.3 mm Section
Carbon HRC
Middle Section 1 (MS1)
Push-Button Folding
105–130 cm (Ultratrail SL) / 110–130 cm (Neotrail Pro SL), Fixed
This genuine LEKI Middle Section 1 (MS1) spare fits the Ultratrail FX.One SL & Neotrail Pro FX.One SL — LEKI's Racing Series trail running pole built for racers running superlight setups where every gram counts. The 11.3 mm Carbon (HRC) section is supplied at 225 mm to match the pole sizes listed below — fit the correct length and the pole performs exactly as it left the factory. These are fixed-length poles, so this section is length-specific — check your pole's printed length before ordering. From UK ultras to fast valley loops, the right spare gets your poles back under you for a fraction of the cost of a new pair.
BEFORE YOU ORDER — QUICK CHECK
✓ Your pole is the Ultratrail FX.One SL & Neotrail Pro FX.One SL (LE65625841/42 (Ultratrail SL), LE65625891/93 (Neotrail Pro SL) (Ultratrail SL) (Neotrail Pro SL), fixed
✓ The damaged section is the Middle Section 1 (MS1) — see the section guide below
✓ This part fits: Ultratrail FX.One SL and Neotrail Pro FX.One SL — 115 cm and 120 cm poles
✓ Measure the damaged section: 11.3 mm diameter × 225 mm length — other lengths are separate parts
✓ Black endcap? Poles with a black endcap are not user-fittable — do not order a replacement section for them

 

 

▸ Full Technical Specifications
Section type Middle Section 1 (MS1)
Section diameter 11.3 mm
Section length 225 mm
Material Carbon (HRC)
Fitted with Speed Up Ring
Folding system Push-Button (PB)
Full pole diameter stack 13 | 11.3 | 11.3 | 11.3 mm
Pole construction Fixed length — non-adjustable
Tip / Basket Not included — replacement shaft section only
LEKI product code 820126111330225 (EAN 4028173396887)
▸ Compatibility & Fitting Guide
Compatible with
✓ Ultratrail FX.One SL and Neotrail Pro FX.One SL — 115 cm and 120 cm poles
Which section is the MS1?
These poles fold into four sections. From the tip upward: the Lower section (tip end), MS2, then MS1, with the upper section and grip at the top. MS1 is the highest middle section, sitting directly below the upper section.
How the folding system works
The Push-Button (PB) system locks each folding section in place when the pole is assembled. These are fixed-length poles — there is no Vario height adjustment, so each section is supplied at the length that matches its pole size.
How to fit
1. Unfold the pole and locate the joints either side of the MS1 section.
2. Release the folding lock and separate the damaged section from its neighbours.
3. Thread the internal cord through the replacement section, reconnect, and lock the joints back into position.
If the internal cord is damaged, the pole needs a workshop repair — a section swap alone will not fix it.
Black endcap? Do not order — black endcap poles are not user-fittable.
▸ Not Compatible With
✗ Other MS1 lengths for this pole (200 / 250 mm) — these fit different pole sizes
✗ The MS2 and Lower sections of this pole — separate, non-interchangeable parts
✗ Standard Ultratrail FX.One (16 | 14 | 14 | 14 mm shaft) — a 11.3 mm SL section will not fit
✗ Skytera FX.One SL — uses 12 mm sections, a different part series
✗ Any telescopic (Vario non-folding) pole — different section architecture, not FX-compatible

 

 

Trade Mark of Manufacturer: LEKI

Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany

Contact: www.leki.com

You may also like

SIGN UP FOR NEWS OF OUR LATEST PRODUCTS & OFFERS

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Customer Care

Follow Us