14 mm Section
Carbon HRC
Middle Section 2 (MS2)
Push-Button Folding
110–135 cm Fixed
The LEKI Ultratrail FX.One Middle Replacement Section 2 is the genuine spare for the MS2 position of the Ultratrail FX.One — LEKI's carbon racing pole built for trail and ultra runners who want fixed-length stiffness with fast pack-down. The 14 mm Carbon HRC section is the second from the tip in the four-piece construction, connecting via LEKI's Push-Button (PB) folding system. The Ultratrail FX.One is a fixed-length pole — there is no Vario height adjustment — so this section is supplied at 315 mm to match a specific pole length. Built to the original OEM specification, this section restores your poles to full race-pace readiness — whether you're crossing the Brecon Beacons, pushing pace on the North Downs Way, or racing any UK ultra.
BEFORE YOU ORDER — QUICK CHECK
✓ Your pole is a LEKI Ultratrail FX.One (LE65625851) — 120 -125cm
✓ The damaged section is MS2 — the 2nd section from the tip, directly above the lower section
✓ Your pole uses Push-Button (PB) folding joints — not CLD
✓ This is the 315 mm length — confirm it matches your pole's overall length (other lengths are separate parts)
✓ Workshop route: If your pole has a black endcap, or if you are unsure at any step, do not attempt to fit. Email
[email protected] with photos of your full pole, handle, and damaged section, or call +44 (0)1250 710414.
▸ Full Technical Specifications
| Section type |
Middle Section 2 (MS2) — 2nd from tip |
| Section diameter |
14 mm |
| Section length |
315 mm |
| Material |
Carbon (HRC) |
| Folding system |
Push-Button (PB) |
| Height adjustment |
Fixed length — non-adjustable |
| Full pole diameter stack |
16 | 14 | 14 | 14 mm |
| Construction |
FX Folding — Fixed Length (Push-Button) |
| Weight class |
Lite |
| Tip / Basket |
Not included — middle section only |
| LEKI product code |
820226141000315 |
▸ Compatibility & Fitting Guide
Compatible pole
✓ LEKI Ultratrail FX.One (LE65625851) — 110–135 cm fixed length, both colourways
Which section is MS2?
The Ultratrail FX.One has four sections. From the tip upward: Section 1 is the Lower (tip end). Section 2 is MS2 — this section, 14 mm. Section 3 is MS1. Section 4 is the Upper collar, attached to the grip. MS2 sits directly above the lower section.
What is Push-Button (PB) folding?
The Push-Button (PB) system locks each folding section in place when the pole is assembled. The Ultratrail FX.One is fixed length, so there is no Speed Lock height adjustment — the pole length is set, and each section is supplied at the length that matches its pole.
How to fit
1. Unfold and lock the pole, then locate the joint between the lower section and MS2.
2. Press the push-button to release the lock at that joint and separate the sections.
3. Thread the internal cord through the replacement MS2 section, reconnect, and click the push-button back into its locked position.
If the internal cord is damaged, contact
[email protected] or call +44 (0)1250 710414.
Black endcap? Do not order — not user-fittable on black endcap poles. Email
[email protected] with photos first.
▸ Not Compatible With
✗ Ultratrail FX.One SL (article 6562584) — 13 | 11 | 11 | 11 mm shaft, a 14 mm section will not fit
✗ Cross Trail FX Superlite Compact or any CLD + Vario folding pole — different folding system and construction
✗ Any telescopic (Vario) pole — different section architecture, not FX-compatible
✗ The Lower section of this pole — a separate spare (820026141… series), tip end
✗ The MS1 section of this pole — a separate spare (820126141… series) for the 3rd position from the tip, not interchangeable with MS2
✗ Other MS2 lengths (265 / 290 / 340 mm) — these fit different pole lengths
