LEKI Makalu FX Carbon Lower Replacement Pole Section — 14 mm | Tip Section

Product code LE797065220621 - Standard

£38.00
Size Guide
Item added to bag. View bag
Please select a size from above to proceed.
You can select only one domestic product per size.

Description

14 mm Lower Tip Section Speedlock 2+ (SL2+) Aluminium (HTS 6.5) Variable Length 110–130 cm Lite
The Makalu FX Carbon is LEKI's five-section variable-length folding trekking pole — 18|16|14|14|14 mm shaft spanning 110–130 cm via Speedlock 2+, with Carbon (PRC 1000) upper sections and an Aluminium (HTS 6.5) lower tip section. The lower tip section is the fifth and final section of the pole, the point in direct contact with the ground on every plant, and the part most exposed to wear and impact. This genuine LEKI replacement is supplied with the carbide flex tip fitted, ready to install. No basket is included. Note: this is the standard (non-AS) Makalu FX Carbon — if your pole has a DSS spring mechanism, order the Makalu FX Carbon AS lower section instead.
► Full Technical Specifications
Section Position Lower — Tip End
Section Diameter 14 mm
Material Aluminium (HTS 6.5)
Locking System Speedlock 2+ (SL2+)
Construction FX Folding — Variable Length
Anti-Shock No
Weight Class Lite
Length Range 110–130 cm (Speedlock 2+ variable adjustment)
Tip Carbide Flex Tip — included fitted
Basket Not included
Compatible Pole Makalu FX Carbon (non-AS)
Product Code 65220621
► Compatibility & Fitting Guide
✓ Genuine replacement for the Makalu FX Carbon (65220621) — 18|16|14|14|14 mm five-section Speedlock 2+ variable folding pole, length range 110–130 cm, without Anti-Shock DSS.
✓ Supplied with carbide flex tip fitted — no basket included; purchase separately from the LEKI UK spare parts range if required.
✓ Variable length pole — this section fits all settings in the 110–130 cm Speedlock 2+ adjustment range; no separate size selection is required.
✓ Aluminium (HTS 6.5) lower tip section — preserves the original weight, strength, and 14 mm diameter of the factory-fitted section.
✓ Workshop route: If your pole has a black endcap, or if you are unsure at any step, do not attempt to fit. Email [email protected] with photos of your full pole, handle, and damaged section, or call +44 (0)1250 710414.
► Not Compatible With
✗ Makalu FX Carbon AS (with DSS Anti-Shock) — a separate product (65220631); if your pole has the DSS spring mechanism in the upper assembly, order that product instead.
✗ Any Speed Lock 2+ telescopic (non-folding) trekking poles — the FX variable folding section is specific to FX construction and will not fit telescopic shafts.
✗ FX.One (Push-Button fixed-length) poles — different locking mechanism; fixed-length and variable-length FX sections are not interchangeable.
✗ FX sections in other positions — MS1, MS2, MS3, and MS4 sections are separate products; the Lower Tip Section is not interchangeable with other positions in the same pole.
BEFORE YOU ORDER — QUICK CHECK
✓ Confirm your pole is the Makalu FX Carbon standard (65220621) — without Anti-Shock. If your pole has a DSS spring mechanism, order the Makalu FX Carbon AS lower section (65220631) instead.
✓ This pole is variable length (110–130 cm SL2+) — no size selection required; this section fits all settings in the adjustment range.
✓ This is the Lower Tip Section only — no basket is included; purchase separately from the LEKI UK spare parts range if needed.
✓ If the Speedlock 2+ lever, internal elastic cord, or any other section shows damage beyond the tip section, contact [email protected] before ordering.
✓ Workshop route: If your pole has a black endcap, or if you are unsure at any step, do not attempt to fit. Email [email protected] with photos of your full pole, handle, and damaged section, or call +44 (0)1250 710414.

Trade Mark of Manufacturer: LEKI

Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany

Contact: www.leki.com