LEKI Speed Lock 2 Plus (SL2+) Replacement Middle Section — 14 mm / 462 mm
Product code LESECM93 - Carbon
£45.95
Description
LESECM9314 mm Middle Section462 mm LengthCarbon blackSpeed Lock 2 Plus (SL2+)14 mm SectionProduction Era: Approximately 2014–present
This LEKI replacement middle section uses the Speed Lock 2 Plus (SL2+) locking system. At 14 mm diameter and 462 mm printed length, it is the correct replacement for the models listed below. The middle section connects the upper section assembly to the lower section and is the most frequently replaced component after extended field use. No specific model names have been confirmed for this article code in our current records. Before ordering, verify the printed length on your existing section reads 462 mm and the diameter is 14 mm. The locking system must be Speed Lock 2 Plus (SL2+). If unsure, email photos to [email protected] before ordering.
► Full Technical Specifications
| LEKI Spare Part Code | LESECM93 |
| Article Code | 81 06 15 14 0462 98 |
| Section Position | Middle — connects upper to lower section |
| Section Diameter | 14 mm |
| Printed Length | 462 mm (check this on your existing section before ordering) |
| Section Profile | 14 mm constant-diameter tube |
| Material | Aluminium |
| Finish / Colour Code | Carbon black (98) |
| Locking System | Speed Lock 2 Plus (SL2+) |
| Construction | 3-section telescopic (Vario) |
| Production Era | Approximately 2014–present. Verify printed length and diameter on your existing section before ordering. |
| Sold As | Single section |
► Compatible Poles & Fitting Guide
No specific model names are confirmed for this section code in our current records. The following article codes are associated with this section — if your pole carries one of these codes, this section may be compatible.
✓ Associated article codes (model names not established): 65221601 — if your pole carries one of these codes, email photos of the full pole and existing section to [email protected] to confirm compatibility before ordering.
✓ To fit: release the SL2+ lever on the upper section by pressing the unlock button and opening the lever; slide the worn middle section downward and out; insert the new section fully into the upper collar, then close and tension the lever until firm.
✓ Tension check: after fitting, extend the pole to working height and apply firm downward pressure — the section should hold without slipping. Re-tension the lever clamp if needed.
✓ Article code check: the article code is usually printed on the section tube itself. Cross-reference with the codes listed above before ordering. If your code is not listed, email [email protected] with photos for confirmation.
✓ Post-fit care: keep the Speed Lock mechanism clean and free from grit. Dry the section fully before storage; do not store the pole collapsed with moisture inside the tube.
✓ Spare parts support: LEKI typically supports spare parts for approximately 10 years from product launch. Contact [email protected] or call +44 (0)1250 710414 to confirm availability.
✓ LEKI UK service: for warranty queries, complex repairs, or any section you cannot identify with certainty, contact LEKI UK: [email protected] | +44 (0)1250 710414.
► Not Compatible With
✗ Classic Lever Clamp (CLA) or External Lever System (ELS) poles — older lever-based sections are not interchangeable with SL2+ sections
✗ SLS (Super Lock System) poles — internal twist-lock system; Speed Lock sections are not compatible
✗ Folding (FX) poles — entirely different construction, these sections do not apply
✗ Poles with a different section specification — this section is 14 mm diameter and 462 mm
BEFORE YOU ORDER — FOUR-POINT CHECK
✓ Printed length: the printed length on your existing middle section must read 462 mm
✓ Diameter: section diameter must be 14 mm (check the markings on the existing section)
✓ Locking system: confirm your poles use Speed Lock 2 Plus (SL2+)
✓ Construction: confirm 3-section telescopic (Vario); not suitable for folding (FX) or 2-section poles
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com
