LEKI Super Micro Replacement Lower Section
Product code LESECL07 - Black HS
£21.75
Description
LEKI Code: LESECL07 14 mm Lower Section 300 mm Length Black HS SLS (Super Lock System) 16/14 mm Section Production Era: 2003–2009
At 300 mm, LESECL07 is one of the shortest lower sections in the LEKI spare parts range — a dimension that places it firmly in the world of the LEKI Super Micro, a compact SLS trekking pole built to pack small and carry lightly. Whether used as a day-hike companion in Snowdonia or a travel pole that fits into a carry-on, the Super Micro depended on precise SLS section geometry. LESECL07 is the genuine LEKI replacement lower section for the Super Micro family, covering the Black HS finish variant in 14 mm diameter across approximately 2003 to 2009. Short sections see as much ground contact as longer ones, and the Super Micro’s compact construction means damage to the lower section is felt immediately across the adjustment range. LESECL07 restores the original 14 mm diameter and 300 mm printed length, preserving the SLS locking interface and the pole’s short packed geometry. The 300 mm printed length on the existing section is the essential identifier — a longer or shorter section will alter the pack length and clamp positioning of the pole.
► Full Technical Specifications
| LEKI Spare Part Code | LESECL07 |
| Article Code | 81 01 03 14 0300 34 |
| Section Position | Lower — Tip End (position 01) |
| Section Diameter | 14 mm |
| Printed Length | 300 mm (check this on your existing section before ordering) |
| Section Profile | 16/14 mm — upper 16 mm, lower 14 mm |
| Material | Aluminium |
| Finish / Colour Code | Black HS (colour code 34) |
| Locking System | SLS (Super Lock System) — internal twist-lock, code 03 in article number |
| Construction | Telescopic — lower section slides inside 16 mm upper section |
| Production Era | Approximately 2003–2009 — compatible with LEKI Super Micro SLS 16/14 mm trekking poles across multiple seasons; always verify against the printed length and diameter on your existing section |
| Sold As | Single section |
► Compatible Poles & Fitting Guide
LESECL07 is confirmed compatible with the following LEKI poles where identification has been established from official LEKI product records. Always verify against the 300 mm printed length and 14 mm diameter on your existing lower section — these measurements override model name matching.
✓ Super Micro — article codes 062196, 072196
✓ Additional confirmed compatible article code (model name not established from available sources): 032196
✓ Additional confirmed compatible article code (model name not established from available sources): 042196
✓ Additional confirmed compatible article code (model name not established from available sources): 052196
✓ Additional confirmed compatible article code (model name not established from available sources): 062396
✓ Additional confirmed compatible article code (model name not established from available sources): 062397
✓ Additional confirmed compatible article code (model name not established from available sources): 062398
✓ Additional confirmed compatible article code (model name not established from available sources): 062399
✓ To fit: twist the SLS collar at the joint anti-clockwise to release. The lower section slides free. Insert LESECL07 from below, aligning with the internal twist-lock collar. Seat fully then twist clockwise to lock. Set required length and pull-test before use.
✓ SLS lock check: after fitting, apply firm downward pressure on the tip at mid-length setting. The section must not slip. If it does, check that the section is fully seated and the collar is clean; worn SLS collars cannot be tension-adjusted and require collar replacement.
► Not Compatible With
✗ Speed Lock 1 (SL1) poles — lever-based external clamp with a different tube interface; not interchangeable with the SLS internal twist system
✗ Speed Lock 2 (SL2) or Speed Lock + (SL+) poles — later lever generations with incompatible section geometry; do not fit this section to any Speed Lock variant
✗ SLS poles with a 12 mm lower section — LESECL07 is 14 mm; fitting a larger section into a 12 mm socket is not possible
✗ Poles whose existing lower section is not marked 300 mm — the printed length is the definitive check; any other length means a different section part is required
BEFORE YOU ORDER — FOUR-POINT CHECK
✓ Printed length: the existing lower section must be marked 300 mm — this short length is very specific to the Super Micro range; any other measurement means a different section is required
✓ Diameter: the tip end must measure 14 mm — confirm with a calliper or from original product documentation
✓ Locking system: your pole must use the SLS internal twist-lock — rotate the collar at the joint to release; if your pole has an external lever clamp at this joint it uses Speed Lock, not SLS
✓ Section profile: confirm a 16/14 mm telescopic construction — the 14 mm lower section should slide inside a 16 mm upper tube; a different tube diameter means a different section part
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com
