Back
Buy the LEKI Cressida Antishock & Cressida AS Replacement Lower Section online at Leki

LEKI Cressida Antishock & Cressida AS Replacement Lower Section

Product code LESECL102 - Black Anodized

£26.95
Size Guide
Item added to bag. View bag
Please select a size from above to proceed.
You can select only one domestic product per size.
Delivery Info

Description

LEKI Code: LESECL102 12 mm Lower Section 355 mm Length Black Anodized SL2+ (Antishock-Integrated Speed Lock 2) 16/14/12 mm Section Production Era: 2017–2023
The Cressida Antishock is a premium SL2+ antishock trekking pole engineered for rough terrain and extended mountain tours. This 355 mm lower section is the tip end component of the three-piece construction and represents the shortest segment in the 16/14/12 mm profile, ideal for compact packing when collapsed. Built for walkers tackling demanding UK routes like those across the Cotswolds or traversing the rolling South Downs, the Cressida Antishock absorbs impact and vibration while maintaining torsional rigidity. Correct replacement requires verification of both the printed length (355 mm) and diameter (12 mm) marked on your existing lower section. The SL2+ locking system is specific to antishock-integrated models, and fitting the wrong lock type or diameter will compromise safety and function. Always check the printed length on your current section before ordering—this is the definitive specification.

 

► Full Technical Specifications
LEKI Spare Part Code LESECL102
Article Code 81 05 13 12 0355 33
Section Position Lower — Tip End (position 05)
Section Diameter 12 mm
Printed Length 355 mm (check this on your existing section before ordering)
Section Profile 16/14/12 mm — Three-section aluminium construction, telescopic or folding configuration
Material Aluminium alloy
Finish / Colour Code Black Anodized (colour code 33)
Locking System SL2+ — Antishock-Integrated Speed Lock 2 with external lever and damping mechanism
Construction Aluminium shaft with integrated antishock cartridge in upper sections
Production Era Approximately 2017–2023 — Modern SL2+ Cressida Antishock generation; always verify against the printed length and diameter on your existing section
Sold As Single section
► Compatible Poles & Fitting Guide
LESECL102 is confirmed compatible with the following LEKI poles where identification has been established from official LEKI product records. Always verify against the 355 mm printed length and 12 mm diameter on your existing lower section — these measurements override model name matching.
✓ Cressida Antishock — article codes 6402115, 6492115
✓ Cressida AS — article code 65221151
✓ Additional confirmed compatible article code (model name not established from available sources): 6402438
✓ Additional confirmed compatible article code (model name not established from available sources): 6492220
✓ Additional confirmed compatible article code (model name not established from available sources): 64923371
✓ Additional confirmed compatible article code (model name not established from available sources): 65223801
✓ Additional confirmed compatible article code (model name not established from available sources): 65223802
✓ Open the Speed Lock 2 Plus lever fully at the lower joint. Section slides free. Insert replacement from below to internal stop. Close lever firmly. Pull-test before use.
✓ Antishock check: the damping cartridge in the upper sections must compress smoothly; verify by pressing downward on the tip with the pole fully assembled and locked.
✓ SL2+ identification: external lever with broader geometry and integrated damping chamber visible in the upper shaft; antishock cartridges are non-removable and a key feature of the SL2+ variant.
✓ Ensure the lower section seats fully into the middle section before closing the lever; incomplete seating will cause excessive movement and lock failure.
► Not Compatible With
✗ SL1 (Speed Lock 1) locking system — different external lever geometry and damping design
✗ SL+ (Speed Lock Plus) locking system — lacks antishock damping mechanism required for SL2+ operation
✗ Sections with 14 mm or 11 mm lower diameter — will not fit the middle section internal diameter correctly
✗ Poles whose existing lower section is not marked 355 mm — the printed length is the definitive check
 

 

BEFORE YOU ORDER — FOUR-POINT CHECK
✓ Printed length: 355 mm
✓ Diameter: 12 mm
✓ Locking system: SL2+ external lever with antishock damping cartridge visible
✓ Construction: Aluminium alloy with antishock integration in upper sections

Trade Mark of Manufacturer: LEKI

Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany

Contact: www.leki.com

You may also like

SIGN UP FOR NEWS OF OUR LATEST PRODUCTS & OFFERS

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Customer Care

Follow Us