LEKI SLS Black Anodized Replacement Lower Section
Product code LESECL113 - Black Anodized
£21.75
Description
LEKI Code: LESECL113 14 mm Lower Section 440 mm Length Black Anodized SLS (Super Lock System) 16/14 mm Section Production Era: Approximately 2006–2007
This 14 mm lower section is the correct factory replacement for LEKI SLS trekking poles specifying a black anodized aluminium finish, a 14 mm diameter, and a 440 mm printed length. The SLS (Super Lock System) internal twist-lock mechanism requires no external lever: the lower section is rotated anti-clockwise to release, the height adjusted, and then rotated clockwise to lock. The black anodized finish (colour code 033) and 440 mm printed length are both required identifiers for this section. At 440 mm, this lower section is shorter than the 490 mm standard found in the mainstream SLS trekking range, placing it in a specific shorter-geometry configuration produced from approximately 2006 to 2007. Compatible pole model names have not been established from available sources for this section. The specifications — 14 mm diameter, 440 mm printed length, black anodized finish, SLS twist-lock — are all required matches before ordering. When the lower section is bent, cracked, or the SLS mechanism no longer holds, this replacement restores the original geometry and locking function precisely. Verify the printed marking on your existing lower section before ordering. Sold as a single section.
► Full Technical Specifications
| LEKI Spare Part Code | LESECL113 |
| Article Code | 81 05 03 14 0440 33 |
| Section Position | Lower — tip end |
| Section Diameter | 14 mm |
| Printed Length | 440 mm — check this on your existing section before ordering |
| Section Profile | 16/14 mm |
| Material | Aluminium |
| Finish / Colour Code | Black Anodized (033) |
| Locking System | SLS — Super Lock System; internal twist-lock; rotate anti-clockwise to unlock, clockwise to lock; no external lever |
| Construction | Telescopic (Vario) — 3-section |
| Production Era | Approximately 2006–2007. The 14 mm diameter and 440 mm printed length are specific to this configuration — verify both on your existing section before ordering. |
| Sold As | Single section |
► Compatible Poles & Fitting Guide
No specific pole models have been confirmed compatible with this section from available sources. Verify the printed length and diameter on your existing lower section before ordering. If unsure, email [email protected] with photos for confirmation.
✓ Article code check: If the article code on your pole or documentation ends with 14 0440 33, this section is the likely correct replacement — verify by emailing photos to [email protected] before ordering.
✓ Diameter check: This is a 14 mm section. Measure the diameter of your existing lower section with calipers before ordering. A section measuring a different diameter requires a different spare part.
✓ Length verification: The 440 mm printed length is the defining specification — measure the printed marking on your existing lower section, not the physical length. A section showing any other printed length requires a different spare part.
✓ Fitting: Rotate the existing lower section anti-clockwise to disengage the SLS lock, then slide it out from the tip end. Insert the new section and rotate clockwise until the lock engages with firm resistance. Test by applying downward load before use.
✓ Lock engagement: The SLS mechanism should engage with a firm, positive resistance when rotated clockwise. If the section rotates freely or fails to hold under load, the internal SLS collar may require assessment or replacement.
✓ Not sure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] so the correct replacement can be confirmed before ordering.
► Not Compatible With
✗ SLS poles with a lower section of a different diameter — sections of a different diameter will not seat correctly in the SLS collar and the pole will not lock securely
✗ SLS poles with a lower section of a different printed length — SLS lower sections of other printed lengths are different spare parts and are not interchangeable
✗ Speed Lock 1 (SL1) poles — external lever clamping system; SLS twist-lock sections are not interchangeable with SL1 lever collars
✗ Speed Lock 2 (SL2) poles — external lever clamping system; entirely different interface from the SLS internal twist-lock mechanism
BEFORE YOU ORDER — FOUR-POINT CHECK
✓ Printed length: Must read 440 mm on your existing lower section — check the printed marking, not a physical measurement
✓ Diameter: Confirm 14 mm lower section diameter — measure with calipers. This is a 16/14 mm profile section
✓ Locking system: Confirm SLS (Super Lock System) — the section rotates to lock and unlock with no external lever. If your pole has a Speed Lock lever (SL1 or SL2), this section is not suitable
✓ Construction: 3-section telescopic (Vario) with 16/14 mm section profile — verify the profile matches before ordering
✓ Unsure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] for confirmation before ordering
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com
