LEKI Shiva AS & Devine AS Replacement Lower Section
Product code LESECL23 - Nature Anodized
£21.75
Description
LEKI Code: LESECL23 12 mm Lower Section 420 mm Length Nature / Silver Anodized Speed Lock 2 (SL2) 16/14/12 mm Section Production Era: 2008–2009
The Shiva AS and Devine AS are LEKI’s anti-shock ladies’ trekking poles from the 2008–2009 production era, built for walkers who wanted active joint protection alongside a lightweight, slim-profile aluminium build. The Nature / Silver Anodized finish was the hallmark of LEKI’s women’s range in this period, pairing understated elegance with serious performance on long days across the Pennines or the wild moors of Dartmoor. This 420 mm lower section is the tip-end component of the three-piece 16/14/12 mm SL2 construction and the part most subject to wear and impact damage. Correct replacement requires verifying both the printed length (420 mm) and diameter (12 mm) on your existing lower section before ordering. The SL2 Speed Lock 2 external lever is specific to this generation and is not interchangeable with SLS, SL1, or SL+ designs. The AS anti-shock spring is located in the upper section and is unaffected by lower section replacement — but the SL2 collar must match exactly for safe locking.
► Full Technical Specifications
| LEKI Spare Part Code | LESECL23 |
| Article Code | 81 01 08 12 0420 36 |
| Section Position | Lower — Tip End (position 01) |
| Section Diameter | 12 mm |
| Printed Length | 420 mm (check this on your existing section before ordering) |
| Section Profile | 16/14/12 mm — Three-section aluminium construction, ladies’ profile with AS anti-shock upper |
| Material | Aluminium alloy |
| Finish / Colour Code | Nature / Silver Anodized (colour code 36) |
| Locking System | SL2 — Speed Lock 2 with external lever at the lower joint |
| Construction | Telescopic aluminium lower section; AS (Anti-Shock) spring damping in upper section for active joint protection |
| Production Era | Approximately 2008–2009 — SL2 Shiva AS and Devine AS ladies’ generation (season codes 082xxx, 092xxx); always verify against the printed length and diameter on your existing section |
| Sold As | Single section |
► Compatible Poles & Fitting Guide
LESECL23 is confirmed compatible with the following LEKI poles where identification has been established from official LEKI product records. Always verify against the 420 mm printed length and 12 mm diameter on your existing lower section — these measurements override model name matching.
✓ Shiva AS — article codes 082139, 092139
✓ Devine AS — article codes 082141, 092141
✓ Additional confirmed compatible article codes (model names not established from available sources): 6352139, 6352140
✓ Open the SL2 lever fully at the lower joint. The lower section slides free from the middle section. Insert the replacement 420 mm section from below until it seats completely at the internal stop. Close the lever firmly with a positive, decisive action. Pull-test the joint before use to confirm secure locking with no slip or rotation.
✓ SL2 lock verification: apply firm downward pressure on the tip of the assembled pole; the lower section must not slip, extend, or produce any clicking. Any play at the lower joint indicates incomplete lever closure or collar wear.
✓ SL2 identification: the external lever is at the lower joint with a smooth, positive closing action; it is distinguishable from SL1 (smaller, simpler lever) and has no twist mechanism like the SLS system.
✓ AS spring note: the anti-shock damping is in the upper grip assembly and is unaffected by replacing the lower section; if the dampening feel has changed, inspect the upper section separately.
✓ Age check: Shiva AS and Devine AS sections from 2008–2009 are now 16–17 years old; inspect the SL2 lever hinge, collar body, and anodized finish for corrosion or lever wear before use under load.
► Not Compatible With
✗ SLS (Super Lock System) twist collar — entirely different locking mechanism; the twist collar design cannot engage with the SL2 lever collar
✗ Speed Lock 1 (SL1) or Speed Lock + (SL+) external levers — different lever geometry and collar dimensions; will not lock securely with this section
✗ Speed Lock 2+ (SL2+) — revised collar geometry; not interchangeable with the SL2 used on the Shiva AS and Devine AS generation
✗ Poles whose existing lower section is not marked 420 mm — the printed length is the definitive check; do not order based on model name alone
BEFORE YOU ORDER — FOUR-POINT CHECK
✓ Printed length: 420 mm — confirm this figure is printed on your existing lower section before ordering
✓ Diameter: 12 mm — verify the diameter on your existing lower section; 12 mm is the innermost in the ladies’ 16/14/12 mm profile
✓ Locking system: Speed Lock 2 (SL2) — external lever at the lower joint; confirmed on 2008–2009 Shiva AS and Devine AS poles; not SLS, SL1, or SL+
✓ Construction: Three-section telescopic aluminium with 16/14/12 mm profile and AS anti-shock upper; verify all three sections operate correctly after fitting the replacement lower section
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com
