LEKI Compact Replacement Lower Section

Product code LESECL45 - Powder Black

£21.95
Size Guide
Item added to bag. View bag
Please select a size from above to proceed.
You can select only one domestic product per size.

Description

LEKI Code: LESECL45 14 mm Lower Section 305 mm Length Powder Black SLS (Super Lock System) 16/14 mm Section Production Era: Approximately 2000–2006
This 14 mm lower section is the correct factory replacement for the LEKI Compact trekking pole in the SLS powder black configuration, built on the standard 18/16/14 mm three-section telescopic geometry. The Compact used the SLS (Super Lock System) internal twist-lock mechanism — the lower section rotates anti-clockwise to release and clockwise to lock with no external lever required. At 305 mm, this is the shortest printed length in the standard-diameter SLS family, reflecting the Compact’s short-geometry design for a compact collapsed length. The powder black finish (colour code 084) and 305 mm printed length are the defining specifications for this section. The Compact was built for walkers who wanted LEKI SLS reliability in a genuinely portable package. From day routes through the Chilterns to shorter walking holidays across the Yorkshire Dales, its short section geometry kept the collapsed length manageable. When the lower section is bent, cracked, or the SLS mechanism no longer holds, this replacement restores the original geometry and function precisely. The 305 mm printed length is specific to the Compact — verify the printed marking on your existing lower section before ordering. Sold as a single section.
 
► Full Technical Specifications
LEKI Spare Part Code LESECL45
Article Code 81 01 03 14 0305 84
Section Position Lower — tip end
Section Diameter 14 mm
Printed Length 305 mm — check this on your existing section before ordering
Section Profile 16/14 mm
Material Aluminium
Finish / Colour Code Powder Black (084)
Locking System SLS — Super Lock System; internal twist-lock; rotate anti-clockwise to unlock, clockwise to lock; no external lever
Construction Telescopic (Vario) — 3-section
Production Era Approximately 2000–2006. The 14 mm diameter and 305 mm printed length are specific to this configuration — verify both on your existing section before ordering.
Sold As Single section
► Compatible Poles & Fitting Guide
This lower section is confirmed compatible with the following LEKI poles. Always verify the printed length and diameter on your existing lower section before ordering.
Compact — article codes 6332080
Diameter check: This is a 14 mm section. Measure the diameter of your existing lower section with calipers before ordering. A section measuring a different diameter requires a different spare part.
Length verification: The 305 mm printed length is the defining specification — measure the printed marking on your existing lower section, not the physical length. A section showing any other printed length requires a different spare part.
Fitting: Rotate the existing lower section anti-clockwise to disengage the SLS lock, then slide it out from the tip end. Insert the new section and rotate clockwise until the lock engages with firm resistance. Test by applying downward load before use.
Lock engagement: The SLS mechanism should engage with a firm, positive resistance when rotated clockwise. If the section rotates freely or fails to hold under load, the internal SLS collar may require assessment or replacement.
Not sure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] so the correct replacement can be confirmed before ordering.
► Not Compatible With
SLS poles with a lower section of a different diameter — sections of a different diameter will not seat correctly in the SLS collar and the pole will not lock securely
SLS poles with a lower section of a different printed length — SLS lower sections of other printed lengths are different spare parts and are not interchangeable
Speed Lock 1 (SL1) poles — external lever clamping system; SLS twist-lock sections are not interchangeable with SL1 lever collars
Speed Lock 2 (SL2) poles — external lever clamping system; entirely different interface from the SLS internal twist-lock mechanism
 
BEFORE YOU ORDER — FOUR-POINT CHECK
Printed length: Must read 305 mm on your existing lower section — check the printed marking, not a physical measurement
Diameter: Confirm 14 mm lower section diameter — measure with calipers. This is a 16/14 mm profile section
Locking system: Confirm SLS (Super Lock System) — the section rotates to lock and unlock with no external lever. If your pole has a Speed Lock lever (SL1 or SL2), this section is not suitable
Construction: 3-section telescopic (Vario) with 16/14 mm section profile — verify the profile matches before ordering
Unsure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] for confirmation before ordering

Trade Mark of Manufacturer: LEKI

Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany

Contact: www.leki.com