LEKI Wanderfreund Replacement Lower Section
Product code LESECL47 - Powder Black
£21.95
Description
LEKI Code: LESECL47 14 mm Lower Section 392 mm Length Powder Black SLS (Super Lock System) 16/14 mm Section Production Era: Approximately 2000–2006
This 14 mm lower section is the correct factory replacement for the LEKI Wanderfreund trekking pole in the earlier SLS powder black configuration, built on the standard 18/16/14 mm three-section telescopic geometry. The SLS (Super Lock System) internal twist-lock mechanism requires no external lever: the lower section is rotated anti-clockwise to release, the height is adjusted, and the section is rotated clockwise to lock. The powder black finish (colour code 084) and 392 mm printed length are the defining specifications for this version. From accessible moorland paths across Dartmoor to well-worn tracks through the Brecon Beacons, the Wanderfreund was a practical everyday pole from LEKI’s accessible SLS range. When the lower section is bent, cracked, or the SLS mechanism no longer holds, this replacement restores the original geometry and locking function precisely. The 392 mm printed length is specific to this Wanderfreund SLS configuration — verify the printed marking on your existing lower section before ordering. Sold as a single section.
► Full Technical Specifications
| LEKI Spare Part Code | LESECL47 |
| Article Code | 81 01 03 14 0392 84 |
| Section Position | Lower — tip end |
| Section Diameter | 14 mm |
| Printed Length | 392 mm — check this on your existing section before ordering |
| Section Profile | 16/14 mm |
| Material | Aluminium |
| Finish / Colour Code | Powder Black (084) |
| Locking System | SLS — Super Lock System; internal twist-lock; rotate anti-clockwise to unlock, clockwise to lock; no external lever |
| Construction | Telescopic (Vario) — 3-section |
| Production Era | Approximately 2000–2006. The 14 mm diameter and 392 mm printed length are specific to this configuration — verify both on your existing section before ordering. |
| Sold As | Single section |
► Compatible Poles & Fitting Guide
This lower section is confirmed compatible with the following LEKI poles. Always verify the printed length and diameter on your existing lower section before ordering.
✓ Wanderfreund — article codes 6332082, 6332093
✓ Diameter check: This is a 14 mm section. Measure the diameter of your existing lower section with calipers before ordering. A section measuring a different diameter requires a different spare part.
✓ Length verification: The 392 mm printed length is the defining specification — measure the printed marking on your existing lower section, not the physical length. A section showing any other printed length requires a different spare part.
✓ Fitting: Rotate the existing lower section anti-clockwise to disengage the SLS lock, then slide it out from the tip end. Insert the new section and rotate clockwise until the lock engages with firm resistance. Test by applying downward load before use.
✓ Lock engagement: The SLS mechanism should engage with a firm, positive resistance when rotated clockwise. If the section rotates freely or fails to hold under load, the internal SLS collar may require assessment or replacement.
✓ Not sure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] so the correct replacement can be confirmed before ordering.
► Not Compatible With
✗ SLS poles with a lower section of a different diameter — sections of a different diameter will not seat correctly in the SLS collar and the pole will not lock securely
✗ SLS poles with a lower section of a different printed length — SLS lower sections of other printed lengths are different spare parts and are not interchangeable
✗ Speed Lock 1 (SL1) poles — external lever clamping system; SLS twist-lock sections are not interchangeable with SL1 lever collars
✗ Speed Lock 2 (SL2) poles — external lever clamping system; entirely different interface from the SLS internal twist-lock mechanism
BEFORE YOU ORDER — FOUR-POINT CHECK
✓ Printed length: Must read 392 mm on your existing lower section — check the printed marking, not a physical measurement
✓ Diameter: Confirm 14 mm lower section diameter — measure with calipers. This is a 16/14 mm profile section
✓ Locking system: Confirm SLS (Super Lock System) — the section rotates to lock and unlock with no external lever. If your pole has a Speed Lock lever (SL1 or SL2), this section is not suitable
✓ Construction: 3-section telescopic (Vario) with 16/14 mm section profile — verify the profile matches before ordering
✓ Unsure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] for confirmation before ordering
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com
