LEKI Compact Lite Replacement Lower Section

Product code LESECL71 - Black Anodized

£21.95
Size Guide
Item added to bag. View bag
Please select a size from above to proceed.
You can select only one domestic product per size.

Description

LEKI Code: LESECL71 12 mm Lower Section 420 mm Length Black Anodized SLS (Super Lock System) 14/12 mm Section Production Era: Approximately 2003–2010
This 12 mm lower section is the correct factory replacement for the LEKI Compact Lite trekking pole, built on the reduced-diameter 14/12 mm Lite geometry. The Compact Lite used the SLS (Super Lock System) internal twist-lock mechanism for height adjustment — rotate anti-clockwise to release, set height, rotate clockwise to lock — with no external lever required. The 12 mm section diameter is narrower than the standard 14 mm used across LEKI’s mainstream trekking range, placing the Compact Lite in the slimmer Lite geometry built for lighter loads and lower-impact use. The black anodized finish (colour code 033) and 420 mm printed length are the defining specifications for this section. From easy valley walks through the Cotswolds to well-maintained paths across the South Downs, the Compact Lite was designed for lighter use where the reduced Lite geometry offered a practical advantage. When the lower section is bent, cracked, or the SLS mechanism no longer holds, this replacement restores the original geometry and locking function precisely. The 420 mm printed length is specific to the Compact Lite — verify the printed marking on your existing section before ordering. Sold as a single section.
 
► Full Technical Specifications
LEKI Spare Part Code LESECL71
Article Code 81 01 03 12 0420 33
Section Position Lower — tip end
Section Diameter 12 mm
Printed Length 420 mm — check this on your existing section before ordering
Section Profile 14/12 mm
Material Aluminium
Finish / Colour Code Black Anodized (033)
Locking System SLS — Super Lock System; internal twist-lock; rotate anti-clockwise to unlock, clockwise to lock; no external lever
Construction Telescopic (Vario) — 3-section
Production Era Approximately 2003–2010. The 12 mm diameter and 420 mm printed length are specific to this configuration — verify both on your existing section before ordering.
Sold As Single section
► Compatible Poles & Fitting Guide
This lower section is confirmed compatible with the following LEKI poles. Always verify the printed length and diameter on your existing lower section before ordering.
Compact Lite — article codes 6352118
Diameter check: This is a 12 mm section. Measure the diameter of your existing lower section with calipers before ordering. A section measuring a different diameter requires a different spare part.
Length verification: The 420 mm printed length is the defining specification — measure the printed marking on your existing lower section, not the physical length. A section showing any other printed length requires a different spare part.
Fitting: Rotate the existing lower section anti-clockwise to disengage the SLS lock, then slide it out from the tip end. Insert the new section and rotate clockwise until the lock engages with firm resistance. Test by applying downward load before use.
Lock engagement: The SLS mechanism should engage with a firm, positive resistance when rotated clockwise. If the section rotates freely or fails to hold under load, the internal SLS collar may require assessment or replacement.
Not sure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] so the correct replacement can be confirmed before ordering.
► Not Compatible With
SLS poles with a lower section of a different diameter — sections of a different diameter will not seat correctly in the SLS collar and the pole will not lock securely
SLS poles with a lower section of a different printed length — SLS lower sections of other printed lengths are different spare parts and are not interchangeable
Speed Lock 1 (SL1) poles — external lever clamping system; SLS twist-lock sections are not interchangeable with SL1 lever collars
Speed Lock 2 (SL2) poles — external lever clamping system; entirely different interface from the SLS internal twist-lock mechanism
 
BEFORE YOU ORDER — FOUR-POINT CHECK
Printed length: Must read 420 mm on your existing lower section — check the printed marking, not a physical measurement
Diameter: Confirm 12 mm lower section diameter — measure with calipers. This is a 14/12 mm profile section
Locking system: Confirm SLS (Super Lock System) — the section rotates to lock and unlock with no external lever. If your pole has a Speed Lock lever (SL1 or SL2), this section is not suitable
Construction: 3-section telescopic (Vario) with 14/12 mm section profile — verify the profile matches before ordering
Unsure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] for confirmation before ordering

Trade Mark of Manufacturer: LEKI

Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany

Contact: www.leki.com