LEKI Trail, Eagle & Voyager Replacement Lower Section
Product code LESECL75 - Transparent Powder
£21.95
Description
LEKI Code: LESECL75 14 mm Lower Section 490 mm Length Transparent / Clear Lacquer SLS (Super Lock System) 16/14 mm Section Production Era: Approximately 2002–2008
This 14 mm lower section is the correct factory replacement for the LEKI Trail, Eagle, and Voyager trekking poles in the transparent / clear lacquer finish, all built on the standard 18/16/14 mm three-section telescopic geometry. These poles used the SLS (Super Lock System) internal twist-lock mechanism — the lower section rotates anti-clockwise to release, height is set, and the section rotates clockwise to lock with no external lever required. The transparent / clear lacquer finish (colour code 000) presents the raw aluminium surface under a protective clear coat, making this section visually distinct from the coloured anodized versions. The 490 mm printed length is the standard for this family. From the moorland paths of Exmoor to summer walks through the Forest of Dean, the Trail, Eagle, and Voyager in clear lacquer finish represented a mid-range SLS option built for straightforward, reliable performance. When the lower section is bent, cracked, or the SLS mechanism no longer holds, this replacement restores the original geometry and locking function precisely. The 490 mm printed length is specific to this family — verify the printed marking on your existing lower section before ordering. Sold as a single section.
► Full Technical Specifications
| LEKI Spare Part Code | LESECL75 |
| Article Code | 81 05 03 14 0490 00 |
| Section Position | Lower — tip end |
| Section Diameter | 14 mm |
| Printed Length | 490 mm — check this on your existing section before ordering |
| Section Profile | 16/14 mm |
| Material | Aluminium |
| Finish / Colour Code | Transparent / Clear Lacquer (000) |
| Locking System | SLS — Super Lock System; internal twist-lock; rotate anti-clockwise to unlock, clockwise to lock; no external lever |
| Construction | Telescopic (Vario) — 3-section |
| Production Era | Approximately 2002–2008. The 14 mm diameter and 490 mm printed length are specific to this configuration — verify both on your existing section before ordering. |
| Sold As | Single section |
► Compatible Poles & Fitting Guide
This lower section is confirmed compatible with the following LEKI poles. Always verify the printed length and diameter on your existing lower section before ordering.
✓ Trail — article codes 6322021
✓ Eagle — article codes 6322017
✓ Voyager — article codes 6322011
✓ Additional confirmed compatible article codes (model names not established from available sources): 6322445, 6322847, 6322850, 6322431
✓ Diameter check: This is a 14 mm section. Measure the diameter of your existing lower section with calipers before ordering. A section measuring a different diameter requires a different spare part.
✓ Length verification: The 490 mm printed length is the defining specification — measure the printed marking on your existing lower section, not the physical length. A section showing any other printed length requires a different spare part.
✓ Fitting: Rotate the existing lower section anti-clockwise to disengage the SLS lock, then slide it out from the tip end. Insert the new section and rotate clockwise until the lock engages with firm resistance. Test by applying downward load before use.
✓ Lock engagement: The SLS mechanism should engage with a firm, positive resistance when rotated clockwise. If the section rotates freely or fails to hold under load, the internal SLS collar may require assessment or replacement.
✓ Not sure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] so the correct replacement can be confirmed before ordering.
► Not Compatible With
✗ SLS poles with a lower section of a different diameter — sections of a different diameter will not seat correctly in the SLS collar and the pole will not lock securely
✗ SLS poles with a lower section of a different printed length — SLS lower sections of other printed lengths are different spare parts and are not interchangeable
✗ Speed Lock 1 (SL1) poles — external lever clamping system; SLS twist-lock sections are not interchangeable with SL1 lever collars
✗ Speed Lock 2 (SL2) poles — external lever clamping system; entirely different interface from the SLS internal twist-lock mechanism
BEFORE YOU ORDER — FOUR-POINT CHECK
✓ Printed length: Must read 490 mm on your existing lower section — check the printed marking, not a physical measurement
✓ Diameter: Confirm 14 mm lower section diameter — measure with calipers. This is a 16/14 mm profile section
✓ Locking system: Confirm SLS (Super Lock System) — the section rotates to lock and unlock with no external lever. If your pole has a Speed Lock lever (SL1 or SL2), this section is not suitable
✓ Construction: 3-section telescopic (Vario) with 16/14 mm section profile — verify the profile matches before ordering
✓ Unsure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] for confirmation before ordering
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com
