LEKI Wanderfreund Antishock Replacement Lower Section
Product code LESECL80 - Powder Black
£25.95
Description
LEKI Code: LESECL80 14 mm Lower Section 392 mm Length Powder Black SLS + SAS (Anti-Shock) 16/14 mm Section Production Era: Approximately 2002–2008
This 14 mm lower section is the correct factory replacement for the LEKI Wanderfreund Antishock trekking pole, built on the standard 18/16/14 mm three-section telescopic geometry. The SLS + SAS (Super Lock System with Standard Anti-Shock) configuration combines the internal twist-lock height adjustment — rotate anti-clockwise to release, rotate clockwise to lock — with the anti-shock spring mechanism housed in the upper section. The lower section is a standard aluminium replacement that restores the 14 mm geometry without modifying the anti-shock function. The powder black finish (colour code 084) and 392 mm printed length are the defining specifications for this version. From steady walks across the Brecon Beacons to well-worn footpaths through the Cotswolds, the Wanderfreund Antishock was a dependable entry-level SLS+SAS pole. When the lower section is bent, cracked, or the SLS mechanism no longer holds, this replacement restores the original geometry and locking function. The 392 mm printed length is specific to the Wanderfreund — verify the printed marking on your existing lower section before ordering. Sold as a single section.
► Full Technical Specifications
| LEKI Spare Part Code | LESECL80 |
| Article Code | 81 05 08 14 0392 84 |
| Section Position | Lower — tip end |
| Section Diameter | 14 mm |
| Printed Length | 392 mm — check this on your existing section before ordering |
| Section Profile | 16/14 mm |
| Material | Aluminium |
| Finish / Colour Code | Powder Black (084) |
| Locking System | SLS + SAS — Super Lock System with Standard Anti-Shock; internal twist-lock; rotate anti-clockwise to unlock, clockwise to lock; anti-shock spring in upper section |
| Construction | Telescopic (Vario) — 3-section |
| Production Era | Approximately 2002–2008. The 14 mm diameter and 392 mm printed length are specific to this configuration — verify both on your existing section before ordering. |
| Sold As | Single section |
► Compatible Poles & Fitting Guide
This lower section is confirmed compatible with the following LEKI poles. Always verify the printed length and diameter on your existing lower section before ordering.
✓ Wanderfreund Antishock — article codes 6322084
✓ Diameter check: This is a 14 mm section. Measure the diameter of your existing lower section with calipers before ordering. A section measuring a different diameter requires a different spare part.
✓ Length verification: The 392 mm printed length is the defining specification — measure the printed marking on your existing lower section, not the physical length. A section showing any other printed length requires a different spare part.
✓ Fitting: Rotate the existing lower section anti-clockwise to disengage the SLS lock, then slide it out from the tip end. Insert the new section and rotate clockwise until the lock engages with firm resistance. The SAS anti-shock spring system is housed in the upper section and is unaffected by this replacement. Test by applying downward load before use.
✓ Lock engagement: The SLS mechanism should engage with a firm, positive resistance when rotated clockwise. If the section rotates freely or fails to hold under load, the internal SLS collar may require assessment or replacement.
✓ Not sure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] so the correct replacement can be confirmed before ordering.
► Not Compatible With
✗ SLS+SAS poles with a lower section of a different diameter — sections of a different diameter will not seat correctly in the SLS collar and the pole will not lock securely
✗ SLS+SAS poles with a lower section of a different printed length — SLS lower sections of other printed lengths are different spare parts and are not interchangeable
✗ SLS-only poles (no anti-shock) — while the section geometry is compatible, this part is specified for the SLS+SAS configuration; confirm your pole has the SAS anti-shock function before ordering
✗ Speed Lock poles (SL1 or SL2) — external lever clamping system; SLS twist-lock sections are not interchangeable with Speed Lock lever collars
BEFORE YOU ORDER — FOUR-POINT CHECK
✓ Printed length: Must read 392 mm on your existing lower section — check the printed marking, not a physical measurement
✓ Diameter: Confirm 14 mm lower section diameter — measure with calipers. This is a 16/14 mm profile section
✓ Locking system: Confirm SLS + SAS (Super Lock System with Anti-Shock) — the section rotates to lock with no external lever, and the upper section contains a spring anti-shock mechanism. If your pole has a Speed Lock lever, this section is not suitable
✓ Construction: 3-section telescopic (Vario) with 16/14 mm section profile — verify the profile matches before ordering
✓ Unsure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] for confirmation before ordering
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com