LEKI Ergometric Antishock, Ergometric long Antishock & M-Antishock Replacement Lower Section
Product code LESECL81 - Gold Anodized
£21.95
Description
LEKI Code: LESECL81 14 mm Lower Section 420 mm Length Gold Anodized SLS (Super Lock System) 16/14 mm Section Production Era: Approximately 2003–2007
This 14 mm lower section is the correct factory replacement for LEKI’s antishock trekking pole range built around the 16/14 mm SLS geometry — covering models from the Ergometric Antishock and M-Antishock families through to the S-M CorTec AS and S-M Air Ergo AS lines. The SLS (Super Lock System) internal twist-lock mechanism requires no external lever: the lower section is rotated anti-clockwise to release, the height adjusted, and then rotated clockwise to lock. The gold anodized finish (colour code 035) and 420 mm printed length are the defining specifications for this section, consistent across a wide range of compatible poles produced from approximately 2003 to 2007. From long days on the Cairngorms plateau to multi-day routes along the West Highland Way, LEKI’s antishock range delivered consistent, reliable performance across some of the UK’s most demanding terrain. When the lower section is bent, cracked, or the SLS mechanism no longer holds under load, this replacement restores the original 14 mm geometry and twist-lock function precisely. The 420 mm printed length is specific to this antishock configuration — verify the printed marking on your existing lower section before ordering. Sold as a single section.
► Full Technical Specifications
| LEKI Spare Part Code | LESECL81 |
| Article Code | 81 05 03 14 0420 35 |
| Section Position | Lower — tip end |
| Section Diameter | 14 mm |
| Printed Length | 420 mm — check this on your existing section before ordering |
| Section Profile | 16/14 mm |
| Material | Aluminium |
| Finish / Colour Code | Gold Anodized (035) |
| Locking System | SLS — Super Lock System; internal twist-lock; rotate anti-clockwise to unlock, clockwise to lock; no external lever |
| Construction | Telescopic (Vario) — 3-section |
| Production Era | Approximately 2003–2007. The 14 mm diameter and 420 mm printed length are specific to this antishock SLS configuration — verify both on your existing section before ordering. |
| Sold As | Single section |
► Compatible Poles & Fitting Guide
This lower section is confirmed compatible with the following LEKI SLS antishock and ergometric poles. Always verify the printed length and diameter on your existing lower section before ordering.
✓ M-Antishock
✓ Ergometric, Ergometric Antishock, Ergometric long Antishock
✓ Jasper AS
✓ S-M Antishock, S-M Antishock PA, Soft Antishock
✓ S-M CorTec AS, S-M CorTec AS PA
✓ S-M Air Ergo AS, S-M Air Ergo AS PA
✓ Yukon AS, Peak XL AS
Additional compatible article codes exist for which model names have not been established from available sources.
✓ Diameter check: This is a 14 mm section in a 16/14 mm profile. Measure the diameter of your existing lower section with calipers before ordering. A section measuring a different diameter requires a different spare part.
✓ Length verification: The 420 mm printed length is the defining specification — measure the printed marking on your existing lower section, not the physical length. A section showing any other printed length requires a different spare part.
✓ Fitting: Rotate the existing lower section anti-clockwise to disengage the SLS lock, then slide it out from the tip end. Insert the new section and rotate clockwise until the lock engages with firm resistance. Test by applying downward load before use.
✓ Lock engagement: The SLS mechanism should engage with a firm, positive resistance when rotated clockwise. If the section rotates freely or fails to hold under load, the internal SLS collar may require assessment or replacement.
✓ Not sure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] so the correct replacement can be confirmed before ordering.
► Not Compatible With
✗ SLS poles with a lower section of a different diameter — sections of a different diameter will not seat correctly in the SLS collar and the pole will not lock securely
✗ SLS poles with a lower section of a different printed length — SLS lower sections of other printed lengths are different spare parts and are not interchangeable
✗ Speed Lock 1 (SL1) poles — external lever clamping system; SLS twist-lock sections are not interchangeable with SL1 lever collars
✗ Speed Lock 2 (SL2) poles — external lever clamping system; entirely different interface from the SLS internal twist-lock mechanism
BEFORE YOU ORDER — FOUR-POINT CHECK
✓ Printed length: Must read 420 mm on your existing lower section — check the printed marking, not a physical measurement
✓ Diameter: Confirm 14 mm lower section diameter — measure with calipers. This is a 16/14 mm profile section
✓ Locking system: Confirm SLS (Super Lock System) — the section rotates to lock and unlock with no external lever. If your pole has a Speed Lock lever (SL1 or SL2), this section is not suitable
✓ Construction: 3-section telescopic (Vario) with 16/14 mm section profile — verify the profile matches before ordering
✓ Unsure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] for confirmation before ordering
Trade Mark of Manufacturer: LEKI
Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany
Contact: www.leki.com
