LEKI Khumbu Lite AS, Makalu Lite AS, Khumbu Lite Antishock & Corklite Antishock Replacement Lower Section

Product code LESECL99 - Black Anodized

£21.95
Size Guide
Item added to bag. View bag
Please select a size from above to proceed.
You can select only one domestic product per size.

Description

LEKI Code: LESECL99 12 mm Lower Section 385 mm Length Black Anodized Speed Lock 2 (SL2) 14/12 mm Section Production Era: 2003–2010
This 12 mm lower section serves a family of LEKI Speed Lock 2 (SL2) Lite and Ladies trekking poles produced between 2003 and 2010, covering well-regarded models including the Khumbu Lite AS, Makalu Lite AS, Khumbu Lite Antishock, Corklite Antishock, Tremalzo Antishock, and Thermolite XL Antishock. The 12 mm section diameter is smaller than the standard 14 mm used across LEKI’s mainstream trekking range, placing these poles in the reduced-diameter Lite and Ladies geometry designed for lighter construction and smaller users. The SL2 external lever provides fast single-motion height adjustment from 100 to 135 cm, clamping directly against the outer wall of the 12 mm section. The black anodized finish (colour code 033) and the 385 mm printed length are the two defining specifications for this version. From autumn approaches to Ben Nevis in poor weather to steady days across the Yorkshire Dales, these poles served a generation of lighter-framed hillwalkers who valued the responsiveness of a reduced-diameter build. When the lower section is bent, cracked, or worn beyond reliable service, this replacement restores the original 12 mm geometry and SL2 function precisely. The 12 mm section cannot be substituted with a 14 mm section — the lever collar will not seat correctly on a different diameter. Verify both the printed length marking and the diameter measurement on your existing section before ordering. Sold as a single section.

 

► Full Technical Specifications
LEKI Spare Part Code LESECL99
Article Code 81 05 11 12 0385 33
Section Position Lower — tip end
Section Diameter 12 mm
Printed Length 385 mm — check this on your existing section before ordering
Section Profile 14/12 mm
Material Aluminium
Finish / Colour Code Black Anodized (033)
Locking System Speed Lock 2 (SL2) — external lever
Construction Telescopic (Vario) — 3-section
Production Era Approximately 2003–2010. The 12 mm diameter and 385 mm printed length are specific to this SL2 Lite / Ladies family — verify both on your existing section before ordering.
Sold As Single section
► Compatible Poles & Fitting Guide
This lower section is confirmed compatible with the following LEKI SL2 Lite and Ladies trekking poles. Always verify the printed length and diameter on your existing lower section before ordering.
Khumbu Lite AS — article code 65221561
Makalu Lite AS — article code 65221801
Khumbu Lite Antishock / Khumbu Antishock — article code 6492156
Corklite Antishock — article code 6402156
Tremalzo Antishock — article code 6402143
Thermolite XL Antishock — article code 6402134
Additional confirmed compatible article codes (model names not established from available sources): 6402435, 6402437, 6492218, 6492231
Diameter check: This is a 12 mm section. Measure the diameter of your existing lower section with calipers — if it measures 14 mm, this section is not suitable. Only 12 mm SL2 sections are compatible with this lever collar.
Length verification: The 385 mm printed length is specific to this 12 mm SL2 family — measure the printed marking on your existing section, not the physical length. A section showing any other printed length requires a different spare part.
Fitting: Slide the new lower section into the middle section from the tip end. Close the Speed Lock 2 lever firmly to secure. The lever should close flush with the collar — if it does not close fully or the section moves under load, the lever tension may need adjusting.
Lever tension adjustment: If the section moves under normal lever clamping force, tighten the adjuster nut on the clamp collar clockwise in quarter-turn increments until the lever locks securely. Do not overtighten.
Not sure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] so the correct replacement can be confirmed before ordering.
► Not Compatible With
SL2 poles with 14 mm lower sections — this is a 12 mm section; the lever collar will not seat correctly on a 14 mm section and the pole will not lock securely
Speed Lock 1 (SL1) poles — earlier external lever generation with different interfaces; SL2 sections are not interchangeable with SL1 lever collars
SLS (Super Lock System) poles — internal twist-lock mechanism; entirely different locking interface from the SL2 external lever system
Poles with a different lower section specification — must match 12 mm diameter and 385 mm printed length exactly; a section with incorrect dimensions will not lock securely

 

 

BEFORE YOU ORDER — FOUR-POINT CHECK
Printed length: Must read 385 mm on your existing lower section — check the printed marking, not a physical measurement
Diameter: Confirm 12 mm lower section diameter — measure with calipers at the widest point of the section. This is a Lite / Ladies 12 mm section, not a standard 14 mm section
Locking system: Confirm Speed Lock 2 (SL2) — the lever opens outward from a hinged collar. If your pole has an SLS internal twist-lock collar this section is not suitable
Construction: 3-section telescopic (Vario) with 14/12 mm section profile — verify the profile matches before ordering
Unsure? Email photos of the full pole, the damaged section, and any visible article codes to [email protected] for confirmation before ordering

Trade Mark of Manufacturer: LEKI

Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany

Contact: www.leki.com