Back
Buy the LEKI Tour Soft / Colorado / Adventure Replacement Middle Section online at Leki

LEKI Tour Soft / Colorado / Adventure Replacement Middle Section

Product code LESECM12 - Silver Coated

£19.95
Size Guide
Item added to bag. View bag
Please select a size from above to proceed.
You can select only one domestic product per size.
Delivery Info

Description

LESECM1216 mm Middle Section495 mm LengthSilver CoatedClassic Lever Clamp (CLA)16 mm SectionProduction Era: Approximately 1990–2006
The Tour Soft and related LEKI trekking poles use the Classic Lever Clamp (CLA) locking system. This 16 mm middle section at 495 mm length is the correct replacement for the models listed below. The middle section connects the upper section assembly to the lower section and is the most frequently replaced component after extended field use. Before ordering, confirm the printed length on your existing middle section reads 495 mm and that the section diameter is 16 mm. The locking system must be Classic Lever Clamp (CLA). If you are unsure of compatibility, email photos of the full pole and existing section to [email protected] before ordering.

 

► Full Technical Specifications
LEKI Spare Part Code LESECM12
Article Code
Section Position Middle — connects upper to lower section
Section Diameter 16 mm
Printed Length 495 mm (check this on your existing section before ordering)
Section Profile 16 mm constant-diameter tube
Material Aluminium
Finish / Colour Code Silver Coated (25)
Locking System Classic Lever Clamp (CLA)
Construction 3-section telescopic (Vario)
Production Era Approximately 1990–2006. Verify printed length and diameter on your existing section before ordering.
Sold As Single section
► Compatible Poles & Fitting Guide
This section is confirmed compatible with the following LEKI pole models. Verify your article code before ordering.
✓ Tour Soft — confirmed compatible
✓ Air Thermo Long — confirmed compatible
✓ Colorado — confirmed compatible
✓ Adventure — confirmed compatible
✓ Panorama — confirmed compatible
✓ Additional confirmed article codes (model names not fully established): 62106, 62116, 62228, 62229, 62266, 72001, 72273, 72274, 82020, 82021, 82062, 82017, 82258, 82259, 82169, 82278, 92770, 92771, 92772, 92263 and 19 more — if your pole carries one of these codes, email photos to [email protected] for confirmation before ordering.
✓ Spare parts support: LEKI typically supports spare parts for approximately 10 years from product launch. Contact [email protected] or call +44 (0)1250 710414 to confirm availability.
✓ To fit: open the lever clamp on the upper section, seat the middle section fully, then close the lever to lock. Ensure the section is fully engaged before clamping. Dry before storage.
✓ Article code check: the article code is usually printed on the section tube itself. Cross-reference with the codes listed above before ordering. If your code is not listed, email [email protected] with photos for confirmation.
✓ Post-fit care: dry the section fully before storage; do not store the pole collapsed with moisture trapped inside the tube. Keep the lever clamp clean and free from grit or debris.
✓ Fitting check: after fitting, extend the pole to working height and apply gentle downward pressure — the section should hold its position without slipping or creaking. Re-adjust the lever clamp if needed before use.
✓ LEKI UK service: for warranty queries, complex repairs, or any section you cannot identify with certainty, contact LEKI UK: [email protected] | +44 (0)1250 710414.
► Not Compatible With
✗ Speed Lock Plus (SPL) or Speed Lock 2 (SL2) poles — lever-based Speed Lock sections are not interchangeable with Classic Lever Clamp sections
✗ SLS (Super Lock System) poles — twist-lock system; Classic Lever Clamp sections are not compatible
✗ Folding (FX) poles — entirely different construction, these sections do not apply
✗ Poles with a different section specification — this section is 16 mm diameter and 495 mm
 

 

BEFORE YOU ORDER — FOUR-POINT CHECK
✓ Printed length: the printed length on your existing middle section must read 495 mm
✓ Diameter: section diameter must be 16 mm (check the markings on the existing section)
✓ Locking system: confirm your poles use Classic Lever Clamp (CLA)
✓ Construction: confirm 3-section telescopic (Vario); not suitable for folding (FX) or 2-section poles

Trade Mark of Manufacturer: LEKI

Manufacturer & EU Responsible Person: Leki Lenhart GmbH, Karl-Arnold-Stabe 30, 73230 Kirchheim/Teck, Germany

Contact: www.leki.com

You may also like

SIGN UP FOR NEWS OF OUR LATEST PRODUCTS & OFFERS

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Customer Care

Follow Us